Pool and spa inspections organised across Sydney

Selling, leasing or responding to a council notice? CCS Sydney Glass & Mirrors helps you organise a pool or spa barrier inspection by an independent licensed pool inspector across Sydney and surrounding areas. After the inspection, your pool or spa is issued a certificate of compliance, or, if the barrier does not meet the requirements, a certificate of non-compliance with a list of the defects to fix. Inspections can usually be organised within 1 to 3 days, or call us to discuss your situation over the phone.

At a glance

  • Inspections by: an independent licensed pool inspector
  • Covers: swimming pools and spa pools
  • Certificates: certificate of compliance or certificate of non-compliance
  • For: selling, leasing, council notices and peace of mind
  • Booking: usually organised within 1 to 3 days, or call us to discuss
  • If defects are found: use our pool fence rectification service or any contractor you choose
  • Areas: all of Sydney and surrounding areas

When you need a pool or spa certificate in NSW

  • Selling: the contract for sale must include a valid certificate of compliance, a relevant occupation certificate issued within the last 3 years, or a certificate of non-compliance.
  • Leasing: a valid certificate of compliance or relevant occupation certificate is required before a new lease. A certificate of non-compliance is not enough for leasing.
  • Buying with a certificate of non-compliance: the buyer generally has 90 days from settlement to make the pool or spa barrier compliant.
  • Validity: a certificate of compliance is valid for 3 years.
  • Registration: every swimming pool and spa pool must be registered on the NSW Swimming Pool Register.

Organise your inspection well before your property goes to market or a lease is signed, so there is time to fix any defects.

What the inspection checks

The licensed pool inspector checks your pool or spa barrier against the Swimming Pools Act 1992 and the applicable Australian Standard, including:

  • Fence height, generally at least 1200mm above finished ground level
  • Gaps under and between panels, generally no more than 100mm
  • The non-climbable zone outside the fence, free of footholds, trees, pots and furniture
  • Gates that self-close and self-latch from any position and open away from the pool
  • Latch height and shielding
  • Boundary fences that form part of the barrier
  • Windows and doors that open into the pool area
  • Spa pool barriers and covers
  • The resuscitation (CPR) sign
  • Registration on the NSW Swimming Pool Register

How it works

  1. Contact us. Tell us about your pool or spa and why you need the certificate, such as a sale, lease or council notice.
  2. We organise the inspection. An independent licensed pool inspector is booked, usually within 1 to 3 days.
  3. Result. If the barrier complies, a certificate of compliance is issued. If not, you receive a list of defects and a certificate of non-compliance where needed, for example for a sale.
  4. Fix and re-inspect. Defects can be fixed by our rectification team or any contractor you choose, then a re-inspection is organised.

Common reasons pools and spas fail inspection

  • Gates that do not self-close or self-latch
  • Latches set too low or not shielded
  • Gaps under the fence or between panels over 100mm
  • Climbable objects within the non-climbable zone
  • Non-compliant boundary fences
  • Spa barriers or covers that do not meet the requirements
  • Missing or faded resuscitation sign

Most of these are quick to fix, so the sooner you organise the inspection, the more time you have before a sale or lease.

Independent, licensed inspections

Every inspection is carried out by an independent licensed pool inspector, impartially and in the public interest. You are free to choose any contractor to fix any defects found.

Areas we service

We organise pool and spa inspections across all of Sydney and surrounding areas. Contact us or call to discuss.

Not sure what certificate you need? Read our guide to selling or leasing a property with a pool in NSW.

Pool & Spa Inspection FAQs

What is a pool certificate of compliance?

A certificate of compliance confirms that your pool or spa barrier meets the Swimming Pools Act 1992 and the applicable Australian Standard at the time of inspection. It is valid for 3 years.

Do I need a pool certificate to sell my property in NSW?

Yes. The contract for sale must include a valid certificate of compliance, a relevant occupation certificate issued within the last 3 years, or a certificate of non-compliance.

Do I need a pool certificate to lease my property?

Yes. A valid certificate of compliance or relevant occupation certificate is required before a new lease. A certificate of non-compliance cannot be used for leasing.

Do spa pools need a certificate too?

Yes. Spa pools are covered by the same NSW rules, must be registered, and need a compliance or non-compliance certificate for a sale or lease.

What happens if my pool or spa fails the inspection?

You receive a list of the defects and a certificate of non-compliance where needed. Once the defects are fixed, a re-inspection is organised.

How quickly can you organise a pool inspection?

Inspections by a licensed pool inspector can usually be organised within 1 to 3 days, or call us to discuss your situation over the phone.

Who carries out the inspection?

An independent licensed pool inspector carries out every inspection, impartially and in the public interest.

Can I use any contractor to fix the defects?

Yes. You can use our pool fence rectification service or any contractor you choose, and then a re-inspection is organised.

Which areas do you service?

We organise pool and spa inspections across all of Sydney and surrounding areas.